ONLINE LEAK SEALING

ONLINE LEAK SEALING

บริการซ่อม แก้ไขปัญหาการรั่วในระบบท่อของโรงงานอุตสาหกรรม ซ่อมได้ทันทีแบบไม่ต้องหยุดระบบการทำงาน
ทำงานอย่างรวดเร็ว เพื่อลดการสูญเสียของกำลังการผลิตให้ได้มากที่สุด

OUR SOLUTION

TYPE OF LEAK

สามารถแก้ไขรอยรั่ว Stop Leak ได้กับอุปกรณ์ ดังนี้

Power

Oil and Gas

Chemical

Petroleum

Special applications of online leak sealing

Valve Killing

Passing valve seat (gate , globe , ball type etc.)

Pipe Crimping

To provide isolation on the pipe by crimping clamp and sealant injection.

ENGINEERING PROCESS

Leak Sealing Job on Gaskets of Bolted Assemblies

A safe and non destructive process!

Stiffeners

With the view to limiting even more the stress on the flanges’ stud/bolts during the injection stage, all our clamps are designed with safety retainers called ‘’stiffeners’’.

Gasket of Flat Face Flanges

In case of a leak on the gasket of flat face flanges, the sealing is obtained by injecting a clamp machined with a central groove and by installing and injecting ring adaptors on all stud/bolts.

Leak Sealing Job on Pipes

The pipe is covered with a metal enclosure which is progressively filled up with our sealing compound.

With Protective Sleeve

In order to limit the potential risks of compound intrusion into the pipe line, a protective sleeve could be placed over the leaking point before installing and injecting the metal enclosure.

Back Clamp

When the leak is located on the weld seam, we foresee its degradation and further potential disconnection over time by systematically designing a strong back clamp device, either connected to the metal box itself or separate.

Premoulded Box

The leaking pipes showing a high corrosion level and very thin residual thicknesses will be dealt by means of a ‘’premoulded box’’, without injecting sealing compound.

Leak Sealing Job on Valve Gland Packings

Premoulded Box

A leak located  on a valve stuffing box is usually dealt with a G Clamp placed around the packing box area. Then, a drill is operated all through the G Clamp down to the packing. This ‘’break through’’ method creates a channel for injecting our sealing compound.

If our on-site  assessment shows that the nuts of the packing gland flange are faulty or damaged, strengthening metal blocks will be installed before injecting sealing compound.

Leak Sealing Job on Other Static Devices

DSCN0200-1030x773
Photo-010-1030x773

Contact us today

พร้อมลุยทุกงานซ่อม "on-site service"
เมื่อเจอรอยรั่ว ทีมช่างไปถึงหน้างานได้ภายใน 24 ชั่วโมง
"งานเร็ว แก้จบ เสร็จไว"

063-271-9119

Get in Touch

Scroll to Top